Believe it or not, your sink is one of the most vital appliances in your home. You will use it for an assortment of activities. From washing your hands to cleaning your food, all of these depend on a working sink. Sometimes, it will not work as intended since they are not as invulnerable as we initially thought.
One of the biggest issues that a sink may have has to do with a leak somewhere. While a leaky sink is not the end of the world, it can be disastrous if left unattended. Thankfully, you can circumvent this issue by following some key pieces of guidance.
Plumbing Services
A leaky sink can be repaired in short order; all it takes is knowing where to look to find the problem. However, not all of us are experts when it comes to taking care of our appliances. In this regard, you may have to call in a professional to get the job done right. A plumber Hamilton will be able to do this for you.
These individuals will have the right tools for the job and can locate the issue causing the leak. It may cost more than you anticipated, but you are always better safe than sorry. Those pesky leaks will now be a thing of the past!
Water Valve
No matter what water-based appliance you have in your home, it will always be connected to a power source. From the washing machine to the leaky sink, a water valve will usually be this source. If any work is to be done to repair the latter, you will need to ensure it is fully shut off. Head on down to your basement to locate the valve.
Usually, a water valve will be immediately noticeable. It may be coloured red, to be easily seen. When turning off the water valve, you have to ensure that it is completely switched off. Leaving it on accidentally can put the subsequent repair job in peril and make things worse.
Removing the Faucet
When it comes to fixing a leak in your sink, there is some initial groundwork to follow. For starters, you will have to look at the external components of the sink. Though most of the work has to do with the back-end, you will have to remove the faucet handle first. However, many sinks have different types of faucet handles.
Sometimes, all it takes is removing the handle through a screwdriver. Or, you may have to use a hex key or wrench to manually take off the handle and loosen the screw. After it has been loosened accordingly, you will have to pull the handle out. If you have a manufacturer’s manual, follow the steps to properly take the handle off.
Sink Cartridge Replacement
Once the faucet’s handle has been removed, you will have to turn your attention to the cartridge. Generally speaking, the cartridge is what is the cause of a leaky sink in this area. Since they come in various shapes and sizes, you will have to find the right one. Take a look at the old cartridge, and bring it to a department store.
Find a customer service representative, and ask them where you can find a similar cartridge. Once you have acquired it, head back home and install the newer component inside. Then, reassemble the faucet’s handle back into place. After turning on the valve, run some water out of the sink. All should now be well concerning the leak.
Sink Drain
In other cases, a leaky sink problem could result from a faulty drain. To rectify this part of the sink, you will have to turn your attention to the nut near the pipe. All it usually takes here is a strong tightening motion so that nothing remains loose. If the leak persists, inspect the gasket inside, and look for any signs of wear and tear.
If there are any cracks around this part, it could be a sign of malfunctioning, causing the sink to leak. Unless it can be fixed accordingly, you will generally have to replace the entire area. By doing this, you can ensure that there will be no more leaks causing you problems.
Sink Adhesive
An extension of the previous point has to do with the drain seal, which could be a bit faulty. Look at its appearance, and apply some adhesive in and around the exposed seal. You may also have to replace the seal to fully fix the problem in question.
